PRO FOAM polyurethane foam, sprayable PU, 700 ml en stock

PRO FOAM polyurethane expanding foam, sprayable PU, 700 ml SOUDAL reference 120350.

Product description:

Pro Foam Gun is a single-component, sprayable polyurethane foam.

The foam contains gases (CFC- and HCFC-free), which do not attack the ozone layer.

Characteristics :

– High shape stability (no shrinkage or post-expansion)

– High filling efficiency

– Excellent adhesion to all substrates, except PE/PP

– Excellent thermal and acoustic insulation

– Excellent assembly properties

– Not UV-resistant

Applications :

– Installation of windows and doors.

– Cavity filling

– Installation and repair of ridge tiles

– Application of low-noise coatings

– Optimizing insulation in the refrigeration sector.

Shelf life :

12 months in closed packaging in a cool, dry place (Between 5 and 25°C), Always store upright.

Instructions for use :

Shake aerosol for at least 30 seconds, or at least shake can 20 times strongly.

Place can on spray gun.

Slightly moisten the clean, grease-free surface to speed up foam curing.

Only partially fill voids (approx. 65%), as the foam will continue to swell.

Shake can regularly during use. If applying several coats, moisten the substrate between each coat.

Uncured foam can be removed with Soudal Foamcleaner or acetone.

Before using the cleaner, check if surfaces are affected. Plastics and layers of lacquer or paint can be particularly sensitive to this.

Lightly moistening the substrate optimizes adhesion, increases yield and accelerates curing. To fill large volumes: apply foam in layers, moistening between coats. For unusual substrates, a preliminary adhesion test is recommended